Submersible Agitator Slurry Pump — Settled Solids Agitation & Slurry Pumping
Heavy-duty submersible agitator slurry pumps for re-suspending settled solids, slurry pumping, and tank desludging. Available from 2 HP to 15 HP with agitator impeller. Trusted across India since 2002.
Quick Answer: What Is an Agitator Slurry Pump?
A submersible agitator slurry pump (also called a slurry agitator or pump with agitator) is a heavy-duty submersible pump with an integrated agitator impeller mounted beside the main impeller. The agitator stirs settled sediment, silt and solids at the tank bottom back into suspension before pumping, so the slurry leaves the tank at consistent density instead of clogging the intake. Flow Chem agitator slurry pumps handle concentrations up to 40% solids by weight, 2-15 HP, flows up to 100 m³/hr and solids to 60 mm — built in an ISO 9001:2015 Gujarat works and supplied across India since 2002. Send your slurry density and tank size for a free sizing check before you order.
About Submersible Agitator Slurry Pumps
Flow Chem submersible agitator slurry pumps are purpose-built for re-suspending settled solids and pumping heavy slurry in industrial and municipal applications. Designed and manufactured at our ISO 9001:2015 certified facility in Gujarat.
The integrated agitator impeller stirs settled solids into suspension before the pump impeller draws them in — preventing clogging and ensuring consistent slurry density in the discharge. This makes them ideal for sewage treatment plants, ETP tanks, and industrial sumps where solids accumulate at the bottom.
Available from 2 HP to 15 HP with cast iron construction, double mechanical seals, and agitator impeller as standard. Flow Chem agitator pumps handle slurry concentrations that would clog conventional submersible pumps.
Key Features
Engineered for heavy slurry handling with integrated agitation system
Integrated agitator impeller stirs settled solids into suspension before the pump draws them in. Prevents accumulation at the tank bottom and ensures consistent slurry density in the discharge line.
Double mechanical seals with oil chamber protect the motor from abrasive slurry ingress. Each seal assembly is pressure-tested before dispatch for reliable performance in demanding conditions.
Premium-grade cast iron pump casing, impeller, and agitator for maximum durability in abrasive slurry environments. Hardened wear plate extends service life with minimal maintenance.
Open impeller with wide clearances handles high-concentration slurry without clogging. Combined agitation and pumping action prevents solids from accumulating around the pump intake.
Class F insulation motors rated for continuous duty in demanding slurry applications. Over-sized motor design handles the additional torque load from the agitator impeller.
Compatible with guide rail auto-coupling systems for easy installation and removal without entering the sump. Reduces maintenance downtime and improves operator safety in deep tanks.
Slurry, Sediment and Settled Solids: Terms Explained
Spec sheets and tenders use these terms interchangeably — here is what each one means for pump selection
| Term | What it means |
|---|---|
| Slurry | A liquid carrying suspended solids — sediment, silt, sand, ash or process solids. Specified by concentration (% solids by weight) and particle size, not just flow and head. |
| Slurry agitator / agitator for slurry | The stirring device that re-suspends settled solids so the pump can move them. In these pumps it is built into the unit — no separate tank agitator or manual desludging needed. |
| Sediment & silt | Fine solids that settle and compact at the bottom of sumps, tanks and ponds. Compacted sediment is what blocks a standard submersible pump intake — the agitator loosens it first. |
| Tailings & mine slurry | Leftover mineral solids from ore processing, pumped from sumps and ponds. A core mining application — see our slurry pump selection guide for mining. |
| Fly ash, lime & gypsum slurries | Fine mineral slurries from power, chemical and cement duties (ceramics and cement is a standard Flow Chem application). Fine particles settle fast — agitation before pumping is what keeps lines moving. |
| Desludging & dredging | Pumped removal of settled solids from tanks, sumps and ponds. STP desludging and ETP sludge handling are the two most common Flow Chem agitator duties. |
Whether the duty is a mine sump, an STP desludging point or a construction dewatering pit, the selection logic is the same: match concentration, particle size and flow first. The mines dewatering guide covers the wider pumping system around the slurry duty, and our wastewater pump maintenance schedule shows how to keep seals and oil chambers healthy in slurry service.
Technical Specifications
Flow Chem agitator slurry pump models for industrial and municipal slurry applications
| Specification | Agitator Slurry Pump Models |
|---|---|
| Motor Power | 2 HP to 15 HP |
| Power Supply | 3-Phase, 415V, 50Hz |
| Flow Range | Up to 100 m³/hr |
| Head Range | Up to 20 meters |
| Max Solid Size | Up to 60mm |
| Max Slurry Concentration | Up to 40% by weight |
| Insulation Class | Class F |
| Sealing | Double mechanical seal + oil chamber |
| Material | Cast iron (FC 250 grade) |
| Impeller Type | Open non-clog with agitator |
| Discharge Size | 50mm to 150mm |
| Duty Cycle | Continuous (S1) |
Custom specifications available for specific slurry applications. Contact our engineering team for pump selection assistance.
Applications
Flow Chem agitator slurry pumps handle heavy slurry across India's industrial and municipal sectors
STP Desludging
Re-suspending and pumping settled sludge from sewage treatment plant tanks. Agitator stirs compacted sludge for consistent pumping and prevents accumulation.
ETP Sludge Handling
Effluent treatment plant sludge agitation and transfer. Handles chemical sludge, biological sludge, and mixed industrial waste with high solid concentrations.
Mining Slurry
Mineral processing slurry pumping with integrated agitation. Handles ore slurry, tailings, and mine water with suspended abrasive particles.
Construction Sumps
Construction site sump desludging and muddy water pumping. Agitator re-suspends settled mud, sand, and debris for complete sump cleaning.
Chemical Plants
Chemical industry slurry agitation and transfer. Handles corrosive and abrasive chemical slurries with appropriate material construction options.
Ceramics & Cement
Ceramic slip, clay slurry, and cement slurry pumping with agitation. Prevents settling of heavy mineral particles during transfer operations.
Agitator Slurry Pump vs Standard Submersible Pump
Choose the right pump type for your slurry application
Agitator Slurry Pump
Best for: Applications with settled solids, heavy slurry, and tanks where material accumulates at the bottom.
Integrated agitator impeller re-suspends settled solids before pumping. Prevents clogging from compacted material. Handles slurry concentrations up to 40% by weight. Eliminates the need for separate agitators or manual desludging.
Typical uses: STP desludging, ETP sludge handling, mining slurry, construction sumps, chemical slurry transfer.
Standard Submersible Pump
Best for: Relatively clean water or low-solids applications where material does not settle heavily.
Standard impeller pumps water with suspended solids but cannot re-suspend settled material. May clog if solids accumulate around the intake. Lower cost for applications that don't require agitation.
Typical uses: Drainage, clean water transfer, stormwater pumping, low-solids effluent transfer.
Not sure which pump type is right for your application? Contact our engineering team for free pump selection assistance.
Explore Our Full Product Range
Comprehensive range of industrial submersible pumps for all applications
Submersible Sewage / Sludge Pump
Learn More →
Submersible Drainage Pump
Learn More →
Submersible Waste Water Pump
Learn More →
Submersible Agitator Slurry Pump
Learn More →
Submersible Cutter Pump
Learn More →
Submersible Jet Aerator Pump
Learn More →Why Choose Flow Chem Agitator Slurry Pumps
Trusted by industrial and municipal clients across India for reliable slurry handling
🏆 20+ Years Experience
Manufacturing agitator slurry pumps since 2002. Over two decades of field-proven performance in Indian slurry conditions — from mining to municipal STPs.
✅ ISO 9001:2015 Certified
Every agitator pump undergoes comprehensive testing including hydraulic performance, seal integrity, agitator balance, and vibration analysis. Test certificates provided with each pump.
🔧 Free Technical Consultation
Our engineering team helps you select the right pump model based on slurry density, solid size, flow rate, head, and tank configuration. No obligation, no charge.
🛡️ Double Seal Protection
Double mechanical seals with oil chamber provide reliable motor protection in abrasive slurry environments. Secondary seal prevents damage even if primary seal shows wear.
🚚 Quick Delivery Across India
Standard models dispatched within 2-5 working days. We deliver to all states across India through our logistics network. Emergency delivery available for critical operations.
🤝 After-Sales Support
Dedicated after-sales team at our Mumbai office. Spare parts including replacement agitator impellers, wear plates, and seal kits available with fast turnaround.
Frequently Asked Questions
What is an agitator slurry pump?
An agitator slurry pump is a submersible pump with an integrated agitator impeller that stirs settled solids into suspension before pumping. This prevents clogging and ensures consistent slurry density in the discharge line.
What is the maximum slurry concentration a Flow Chem agitator pump can handle?
Flow Chem agitator slurry pumps can handle slurry concentrations up to 40% by weight, depending on the specific model and solid characteristics. Contact our engineering team for application-specific recommendations.
How does the agitator impeller work?
The agitator impeller is mounted below the pump impeller on the same shaft. As the motor runs, the agitator creates a stirring action at the tank bottom, re-suspending settled solids into the liquid so the pump can draw them in consistently.
Can the agitator pump run dry?
No, agitator pumps should not run dry. The pump requires minimum submersion for both cooling and seal lubrication. Dry running can damage the mechanical seals and motor. Thermal overload protection is included as standard.
Do you provide installation services for agitator pumps?
Yes, Flow Chem provides professional agitator pump installation services across India. Our team handles site assessment, tank preparation, pump installation, guide rail fitting, electrical connections, and commissioning.
When does a slurry tank need an agitator pump?
Whenever solids settle and compact between pumping cycles — STP and ETP sludge sumps, mining slurry ponds, construction sumps and process tanks. Signs you need one: the standard pump clogs on startup, discharge gets thinner the longer you pump, or operators must manually desludge the tank bottom. An agitator slurry pump re-suspends the settled layer first, so pumped concentration stays consistent up to 40% solids by weight.
What is driving agitator pump market demand in India?
Municipal STP and industrial ETP construction, mining output and stricter fly-ash and sludge handling rules are the main growth drivers for agitator pumps in India. Flow Chem has manufactured submersible agitator slurry pumps in Gujarat since 2002 and supplies them across India for sewage desludging, mining slurry and chemical plant duties. Ask for a quote with your tank size and slurry concentration.
Can a submersible pump have a built-in agitator?
Yes — that is exactly what this pump is. The agitator impeller is integrated on the same shaft unit below the motor, stirring settled solids into suspension as the pump runs. It replaces the older approach of a separate tank agitator plus a standard submersible pump, cutting one motor, one set of controls and one maintenance item from the installation.
Get a Quote for Agitator Slurry Pumps
🏭 Factory (Gujarat)
C1-275/18, GIDC, Umbergaon
Dist: Valsad 396171
Gujarat, India
🏢 Sales Office (Mumbai)
LG-42, 10th Central Mall
Near D-Mart, Mahavir Nagar
Kandivali (West), Mumbai-400067
Phone: 7666745564 / 8433936502 | Email: saleflowchem@gmail.com
Need an Agitator Slurry Pump for Your Application?
Contact Flow Chem Pumps for competitive pricing, technical consultation, and expert advice on selecting the right agitator pump for your slurry handling needs.
Get a Free Quote →